GPS All Type Terrain Measuring Tool GPS Land Measuring Instrument
Power On,Power Off Of GPS Land Measuring Instrument:
1. Power on:
With the equipment off,hold the "Stop" button until the screen lights up(about 2 sec)and the boot interface appears,then it’s successful to turn on the device.
2. Power off:
① After booting,press the "Stop" button for 2 seconds .
② When the shutdown page appears,press the 【Enter】 button to confirm the shutdown.
Note:
① When the instrument is in non-measurable state, if the instrument is not operated, the instrument will automatically shut down after 1 hour.
② When the battery power is lower than 5 %, it will give the prompt and turn off automatically.
Unit Setting Of GPS Land Measuring Instrument:
① On the home page of boot,press the 【Settings】button to enter the settings interface；
② Press the▲▼button move to“unit setting”；
③ Press the【Enter】button to enter；
④ Press ▲▼ button to choose the unit you want.
⑤ After finishing setting,press the "Stop" button to exit.
Note:After setting, the measurement interface data is displayed as the set unit, and the units displayed in the data records are all set units.
| Functions | S4 |
| Positioning accuracy | 2.5m |
| Initial barometric calibration | √ |
| Normal area measurement | √ |
| Mountain area measurement | √ |
| Intell. Slope measurement | √ |
| Fixed point measurement | √ |
| Fixed width area measurement | √ |
| Normal distance measurement | √ |
| Manual distance measurement | √ |
| Altitude display | √ |
| Altitude measurement | √ |
| Track display | √ |
| Mu setting | √ |
| Unit setting | √ |
| Time display | √ |
| Data statistics | √ |
| Historical record | √ |
| Lighting /Currency detection | √ |
| Dry battery | √ |
| lithium battery | √ |
| Data storage | 200 |
| Voice broadcast | √ |
| Data export | √ |
Product Tags:
|
|
Terrain Measuring GPS Land Measuring Instrument Images
|
